K-DESIGNS
 
 
 
 
 
TOP
List of materials     
____________________________________________________________________________________
Material            Dimensions      Quantity/m/kg   Rem.
____________________________________________________________________________________
Plywood
WB Ocume, fir
12mm                2.44 x 1.22 m        3         bridge deck, mast support,
8mm                 2.44 x 1.22 m        1         bunk, rudder
6mm                 2.44 x 1.22 m       19         planking,cabin     *                                                  bulkheads, decks
4mm                 2.44 x 1.22 m        4         forward beam bulkh.pantry, table
                                                   dagger board       
Birch ply
4mm                 2.44 x 1.22 m        2         bridge front
WOOD
Clear fir              20 x 25 mm       90 m       stringers, aft beam
Clear fir              25 x 35 mm       50 m       chine  stringers, mast support etc
Clear fir              25 x 50 mm        4 m       stem
Clear fir              25 x 80 mm       12 m       keel
Spruce                 34 x 20 mm        3 m       rudder housing
Spruce                 15 x 30 mm        14 m      rudder, dagger board
Diverse materials
Epoxy/hardener                          40 kg
Aerosil (used silica)                    3 kg
Micro spheres                            4 kg
Glass fabric           240 gr/m2         50 m2     covering
U.D carbon fiber       300 gr/m2     5cm x 10m     rudder/dagger board superstructure
Acrylic glass          4mm              1.2 m2     windows
Fasteners
Particle board screws  2.5 x 25mm         1200      used instead
                       3.5 x 45mm          600      of clamps
                                                   Remove after epoxy is cured
                                                  
Al tube               36/32 mm             2   m     rudder link
Al tube               70/66 mm             6.4 m     mast
Al square tube        55x35x2mm            2.1 m     boom        
U-profile             50x50x4mm             .2 m     mast step
Stainless steel
bar                  60 x 4 mm             0.8m      chain plates
Rigging                   see rigging drawings
Sails                     see drawings
Engine                    outboard till 6 HP
 
 
HOME
MULTIHULLS



DESCRIPTION
SAMPLE DRAWING
TOP VIEW
Copyright 2007/2017   by B. Kohler  all rights reserved