Length: 4.35 m
Beam:
2.10 m
Weight: 66 kg
Sail area: 13
m2
Construction time about 120 hours
SC 435 has
asymmetrical hulls and is build in a form of matched hole technique used in the
aircraft industry. In this way the hulls are self aligning. There is no need for
jigs etc. The hulls are plywood/ epoxy constructions. Beams and mast are made
from standard aluminium tubes to speed up construction and safe money.The boat is
a perfect beach cat, very good to handle even in a lot of wind. No tools are
necessary to set the boat up, or break down after a days sail. The boat is light
enough for roof rack transport.More than 600 of this boats sailing in 48
countries around the world. The story is going on. The boat was built in eight
weeks spare time.
the catamaran for the first time DIY boat builder
updated
09/02/2008
NEW
WOOD EPOXY
BEAM
Plans
owners who have
difficulties to get the
Aluminium tubes, drop
me a mail
and I will send
you the drawings
ORDER
DELIVERY
The plans are delivered as E-book
with a
step by step building instruction (18 pages)
and 22 drawings
plans cost:
Euro; 50,-
Copyright c 2008 by B.
Kohler all rights reserved
An other
addition to the SC 435 fleet. This boat was built in Croatia.
Click on the picture for some
construction pictures
Youtube video