K-designs
The MANTA
The MANTA is the perfect offshore cruiser - live on board boat. The boat shown on the top has 3 double cabins. The port hull comprises a garage for a motor scooter. The boat on the bottom has four cabins. All cabins are very roomy. The salon has sitting areas for up to eight. Under the floors is, besides the two engines, room for 500 l of water and 300 l of fuel. This boat has proven it self in the rough North Atlantic regions in winter sailing. The boat is to be build like our other designs in the ply(wood)/glass/epoxy technique. Construction time depends on your skill and will be between 2800 and 3000 hours.
Manta layout
1.watertight bulkhead| 2.work shop| 3. shower room| 4. toilet| 5. bath room| 6. engine under floor| 7. aft cabin|8. steering station| 9. cockpit| 10 salon| 11. navigation area| 12. kitchen| 13. garage for motor scooter| 14. wet lockers
PLANS  US $ 1400,-
STUDY PLANS  US $  20,-
MANTA
North Atlantic version
Manta
Med. version
setstats 1 http://www.ikarus342000.com/CATpage.htm http://www.ikarus342000.com/INTRO.htm
updated 07/04/2007
LINK    NEWS  DOWNLOAD     WOOD EPOXY  CONTACT
Copyright © 2007  by B. Kohler   all rights reserved
SPECIFICATION

L.o.a.:                 12.65  m
L.w.l.:                 11.90  m
Beam  :                  7.10  m
Beam c/c :               5.20  m
Draught  :               0.85  m
Mainsail                42.00  m2
Jib                     28.00 m2

Stay sail               18.00 m2
Reacher                 80.00  m2

Weight empty          4800.00  kg
Weight load c.w.l.    7200.00  kg

Aux.power 2x            22.00  HP

L/B hulls               1 : 12
B/L ratio c/c           48 %
Stability maximum    32000     kg/m
Part of the kitchen
Salon looking towards the kitchen
Navigation area, left door is bathroom entrance
part of the bathroom
one of the aft cabins
To give an idea of the room inside here a couple of pictures
Previous | Next | Random
Multihull WebRing